نمایش 1–12 از 189 نتیجه
جشواره فروش محصولات اپل
برای تغییر این متن بر روی دکمه ویرایش کلیک کنید. لورم ایپسوم متن ساختگی با تولید سادگی نامفهوم از صنعت چاپ و با استفاده از طراحان گرافیک است.
زمان باقی مانده تا اتمام جشواره
فیلتر های فروشگاه
3WAY PLUG VALVE
برای قیمت تماس بگیرید3-Way Tapered Plug Valves are designed to handle clean and dirty, viscous and corrosive liquids, sludge, abrasive and fibrous slurries, and clean and dirty corrosive gases. They are used a variety of applications in Sewage Treatment, Water Treatment & Distribution, Chemical & Petrochemical, Pulp & Paper, Mining, Power and other process industries.
Three way plug valve is applicable to change the mediums flow direction or distribute the mediums to different directions, including L type port or T type port. 3 way plug valve is used mostly in various industries such as petroleum, chemical industry, pharmacy, chemical fertilizer, power industry, etc.
Air Release Valve
برای قیمت تماس بگیریدAir release valves, also called small orifice valves, are designed to automatically release small pockets of accumulated air from a pipeline while the system operates under pressure exceeding atmospheric pressure.
AJUSTABLE CHOKE VALVE
برای قیمت تماس بگیریدAdjustable Choke Valve is a special angle valve designed to reduce pressure of well stream to the required level, so upstream equipment may handle fluids and gases more safely and effectively. Adjustable Choke Valve is often used as a component of wellhead and Christmas tree assemblies, choke manifolds, in-line heaters, desanders and other oilfield equipment. There are two types of commonly used choke valves, adjustable choke valve and positive (bean) choke valves.
AXIAL FLOW CHECK VALVE
برای قیمت تماس بگیریدaxial flow check valves are widely used where high flow performance is required and the risk of water hammer needs to be reduced to a minimum level. Additional advantages include the quick response and low noise level.
Size: NPS 2″~60″(DN50~DN1500）
Pressure Rating: ASME CLASS 150~2500（PN16~PN420）
Body material：Carbon steel, Stainless steel, Alloy steel, Duplex stainless steel
End connection：RF, BW, RTJ
BALL TYPE
برای قیمت تماس بگیریدA ball check valve functions by means of a ball that moves up and down inside the valve. The seat is machined to fit the ball, and the chamber is conically shaped to guide the ball into the seat to seal and stop a reverse flow.
If the pump capacity is not sufficient it is possible to choose a lighter ball, and if water hammer occurs when the pump stops, it may be solved by selecting a heavier ball.
The purpose of using a ball check valve is to prevent backflow in a pipeline system and ball check valves are often placed on the outlet side of a pump to protect the pump. Ball check valves are commonly used in wastewater applications as well as in fire protection and irrigation systems.
Ball check valves are often preferred for use in pumping stations that are rarely attended, since they demand only limited maintenance, typically if the ball makes noise caused by insufficient pump capacity or water hammer.
BALL VALVE
برای قیمت تماس بگیریدThe ball is mounted on a trunnion which supports the pressure load. The seats are spring energized, to allow tightness at low pressure, while at high pressure, the seats are energized by the pressure itself. Body construction is three pieces, bolted joint, made by forging, forged or rolled bar.
BALL VALVE
برای قیمت تماس بگیریدWhen the expected service or design temperature is out of the standard temperature range of ball valve, we can supply high temperature or cryogenic ball valves.
The minimum temperature of cryogenic ball valve is -196°C.
The maximum temperature of high temperature ball valve is +450°C for TCC (Tungsten Carbide Coating) and +650°C for CCC (Chromium Carbine Coating).
